Blog

Company News

Industry News

How to deal with mold abnormalities urgently? ​

How to deal with mold abnormalities urgently? ​

The purpose of these measures is to clarify sudden emergencies in molds and how the company's employees can promptly and accurately report emergencies to the relevant competent departments and relevant mold handling personnel to ensure that sudden emergencies are handled in a timely manner and the emergency is dealt with in a timely manner. The risk posed by the incident to cost and delivery time is minimized.

15

2023

/

12

Interpret the causes of injection mold problems​

Interpret the causes of injection mold problems​

Cracking includes filamentous cracks, micro-cracks, top whitening, cracking on the surface of the part, and trauma risks caused by the mold sticking of the part and the flow channel. According to the cracking time, it is divided into demoulding cracking and application cracking. Mainly due to the following reasons:

15

2023

/

12

24 questions and answers about mold heat treatment​

24 questions and answers about mold heat treatment​

Heating and quenching at 1050~1100℃ and oil quenching can meet the requirements, but generally hot work molds do not require such high hardness. Such high hardness will have poor performance and be difficult to use. Generally, HRC46~50 has good performance. durable.

15

2023

/

12

How many mold people really know the 17 principles of injection mold workshop management?

How many mold people really know the 17 principles of injection mold workshop management?

Injection molding processing is a 24-hour continuous operation, involving plastic raw materials, injection molds, injection molding machines, peripheral equipment, tooling fixtures, sprays, toners, packaging materials and auxiliary materials, etc. There are many positions and complex division of labor. How to make injection molding Is the production operation of the workshop smooth and achieves "high quality, high efficiency and low consumption"?

15

2023

/

12

15 tips for identifying the pros and cons of mold steel​

15 tips for identifying the pros and cons of mold steel​

Fake and inferior steel is prone to folding. Folds are various fold lines formed on the surface of steel, and this defect often runs throughout the length of the product. The reason for folding is that shoddy manufacturers pursue high efficiency and the reduction is too large, resulting in ears. Folding will occur during the next rolling process. The folded product will crack after bending, and the strength of the steel will be greatly reduced.

15

2023

/

12

Investment opportunity analysis: Robots and high-end machine tools are at the forefront​

Investment opportunity analysis: Robots and high-end machine tools are at the forefront​

After a period of silence, recent IPO stocks have begun to gradually rise from their lows. The disk shows that as the hardest-hit area in this round of adjustment, there are many new stocks whose share prices have been cut in half; and after entering 2016, there are still many times when the stock prices of new stocks have suffered heavy losses. According to industry insiders, the sub-IPO camp is seriously oversold. Recently, hot money has appeared in sub-IPO stocks from time to time. Especially when blue chips protected the market yesterday, sub-IPO stocks are ready to move again. Under the current fundamental background, this wave of oversold The downtrend is not likely to end easily. From the perspective of opportunities, it is recommended that investors grasp the oversold rebound of sub-IPO stocks from two aspects. First, pay attention to the high sales of sub-IPO stocks, and secondly, look for investment opportunities in high-growth sub-IPO stocks.

15

2023

/

12

The founding meeting of Zhejiang Mold Industry Federation was successfully held​

The founding meeting of Zhejiang Mold Industry Federation was successfully held​

At 9 a.m. on November 4, 2015, the founding meeting and second membership meeting of Zhejiang Mold Industry Federation were held in Huangyan. The meeting was chaired by Zhang Jiamin, Secretary General of Huangyan Mold Association, and was attended by more than 200 people. Anhui Mold Industry Association President Chen Yingzhi, Secretary-General Zan Xiangming, and Deputy Secretary-General Liu Ping attended the meeting to express congratulations.

15

2023

/

12

< 1 >